我又把電腦改裝成ubuntu了，也許會再試一次Open SUSE···
M＄都渴望大家用裝新電腦來用vista，
但是LINUX這個作業系，卻是鼓勵大家用舊電腦來安裝使用！
最近愈來愈能體會舊電腦的好處。
root@bullock-desktop:~# dmesg
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e8000 size: 0000000000018000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003f6cf300 end: 000000003f7cf300 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003f7cf300 size: 0000000000830d00 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000f0000000 size: 0000000004000000 end: 00000000f4000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7cf300 (usable)
[ 0.000000] BIOS-e820: 000000003f7cf300 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 119MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fe700
[ 0.000000] Entering add_active_range(0, 0, 260047) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 260047
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 260047
[ 0.000000] On node 0 totalpages: 260047
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 239 pages used for memmap
[ 0.000000] HighMem zone: 30432 pages, LIFO batch:7
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v000 COMPAQ ) @ 0x000e8c10
[ 0.000000] ACPI: RSDT (v001 COMPAQ CPQ0968 0x20050518 0x00000000) @ 0x3f7df340
[ 0.000000] ACPI: FADT (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x3f7df3ec
[ 0.000000] ACPI: MADT (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x3f7df460
[ 0.000000] ACPI: ASF! (v032 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x3f7df4e4
[ 0.000000] ACPI: MCFG (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x3f7df547
[ 0.000000] ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0xf808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[ 0.000000] Detected 2992.675 MHz processor.
[ 30.460039] Built 1 zonelists. Total pages: 258016
[ 30.460043] Kernel command line: root=UUID=5835969b-1295-4d5f-89f8-d1adc4d8118f ro quiet splash locale=zh_TW
[ 30.460205] mapped APIC to ffffd000 (fee00000)
[ 30.460207] mapped IOAPIC to ffffc000 (fec00000)
[ 30.460210] Enabling fast FPU save and restore... done.
[ 30.460213] Enabling unmasked SIMD FPU exception support... done.
[ 30.460223] Initializing CPU#0
[ 30.460280] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 30.461527] Console: colour VGA+ 80x25
[ 30.461833] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 30.462175] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 30.481662] Memory: 1019744k/1040188k available (1992k kernel code, 19648k reserved, 893k data, 328k init, 122684k highmem)
[ 30.481673] virtual kernel memory layout:
[ 30.481674] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 30.481675] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 30.481676] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 30.481677] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 30.481678] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 30.481680] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 30.481681] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 30.481684] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 30.560237] Calibrating delay using timer specific routine.. 5990.64 BogoMIPS (lpj=11981292)
[ 30.560277] Security Framework v1.0.0 initialized
[ 30.560282] SELinux: Disabled at boot.
[ 30.560299] Mount-cache hash table entries: 512
[ 30.560426] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
[ 30.560434] monitor/mwait feature present.
[ 30.560436] using mwait in idle threads.
[ 30.560443] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 30.560446] CPU: L2 cache: 2048K
[ 30.560448] CPU: Physical Processor ID: 0
[ 30.560450] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000649d 00000000 00000000
[ 30.560462] Compat vDSO mapped to ffffe000.
[ 30.560465] Remapping vsyscall page to ffffe000
[ 30.560479] Checking 'hlt' instruction... OK.
[ 30.576322] SMP alternatives: switching to UP code
[ 30.576651] Early unpacking initramfs... done
[ 30.858112] ACPI: Core revision 20060707
[ 30.858247] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 30.861239] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
[ 30.861260] SMP alternatives: switching to SMP code
[ 30.861353] Booting processor 1/1 eip 3000
[ 30.871836] Initializing CPU#1
[ 30.952042] Calibrating delay using timer specific routine.. 5985.56 BogoMIPS (lpj=11971122)
[ 30.952052] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
[ 30.952059] monitor/mwait feature present.
[ 30.952065] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 30.952068] CPU: L2 cache: 2048K
[ 30.952071] CPU: Physical Processor ID: 0
[ 30.952073] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003180 0000649d 00000000 00000000
[ 30.952533] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
[ 30.952575] Total of 2 processors activated (11976.20 BogoMIPS).
[ 30.952725] ENABLING IO-APIC IRQs
[ 30.952906] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 31.099976] checking TSC synchronization across 2 CPUs: passed.
[ 0.003999] Brought up 2 CPUs
[ 0.249836] migration_cost=153
[ 0.250138] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 0.250141] Booting paravirtualized kernel on bare hardware
[ 0.250220] Time: 12:18:20 Date: 04/17/107
[ 0.250253] NET: Registered protocol family 16
[ 0.250349] EISA bus registered
[ 0.250354] ACPI: bus type pci registered
[ 0.251187] PCI: PCI BIOS revision 2.20 entry at 0xec51b, last bus=63
[ 0.251189] PCI: Using configuration type 1
[ 0.251191] Setting up standard PCI resources
[ 0.254663] ACPI: Interpreter enabled
[ 0.254666] ACPI: Using IOAPIC for interrupt routing
[ 0.255132] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.255140] PCI: Probing PCI hardware (bus 00)
[ 0.255162] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 0.255620] Boot video device is 0000:00:02.0
[ 0.256103] PCI quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO
[ 0.256107] PCI quirk: region fa00-fa3f claimed by ICH6 GPIO
[ 0.256608] PCI: Transparent bridge - 0000:00:1e.0
[ 0.256659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.271234] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
[ 0.271593] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT]
[ 0.272308] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 0.276430] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.276692] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
[ 0.276945] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.277198] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.277454] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
[ 0.277707] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.277959] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
[ 0.278211] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[ 0.278495] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.278508] pnp: PnP ACPI init
[ 0.282120] pnp: PnP ACPI: found 14 devices
[ 0.282126] PnPBIOS: Disabled by ACPI PNP
[ 0.282182] PCI: Using ACPI for IRQ routing
[ 0.282185] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.774800] NET: Registered protocol family 8
[ 0.774804] NET: Registered protocol family 20
[ 0.775472] pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.775480] pnp: 00:0c: ioport range 0x400-0x41f has been reserved
[ 0.775483] pnp: 00:0c: ioport range 0x420-0x43f has been reserved
[ 0.775485] pnp: 00:0c: ioport range 0x440-0x45f has been reserved
[ 0.775488] pnp: 00:0c: ioport range 0x460-0x47f could not be reserved
[ 0.775490] pnp: 00:0c: ioport range 0x480-0x48f has been reserved
[ 0.775493] pnp: 00:0c: ioport range 0xcb0-0xcbf has been reserved
[ 0.775496] pnp: 00:0c: ioport range 0xf800-0xf81f could not be reserved
[ 0.775499] pnp: 00:0c: ioport range 0xf820-0xf83f could not be reserved
[ 0.775848] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 0.775854] PCI: Bridge: 0000:00:1c.0
[ 0.775856] IO window: disabled.
[ 0.775861] MEM window: disabled.
[ 0.775865] PREFETCH window: disabled.
[ 0.775870] PCI: Bridge: 0000:00:1c.1
[ 0.775871] IO window: disabled.
[ 0.775876] MEM window: e0500000-e07fffff
[ 0.775880] PREFETCH window: disabled.
[ 0.775886] PCI: Bridge: 0000:00:1e.0
[ 0.775889] IO window: 1000-1fff
[ 0.775894] MEM window: e0800000-e0afffff
[ 0.775898] PREFETCH window: 50000000-500fffff
[ 0.775923] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.775944] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 16
[ 0.775950] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.775962] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.775989] NET: Registered protocol family 2
[ 0.819676] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.819798] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.820381] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.820633] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.820636] TCP reno registered
[ 0.831766] checking if image is initramfs... it is
[ 1.384928] Freeing initrd memory: 6997k freed
[ 1.385531] audit: initializing netlink socket (disabled)
[ 1.385544] audit(1179404300.716:1): initialized
[ 1.385646] highmem bounce pool size: 64 pages
[ 1.385738] VFS: Disk quotas dquot_6.5.1
[ 1.385761] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.385812] io scheduler noop registered
[ 1.385815] io scheduler anticipatory registered
[ 1.385818] io scheduler deadline registered
[ 1.385831] io scheduler cfq registered (default)
[ 1.386046] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.386092] assign_interrupt_mode Found MSI capability
[ 1.386095] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.386133] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.386243] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.386289] assign_interrupt_mode Found MSI capability
[ 1.386292] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1.386329] Allocate Port Service[0000:00:1c.1:pcie02]
[ 1.386516] isapnp: Scanning for PnP cards...
[ 1.738056] isapnp: No Plug & Play device found
[ 1.765744] Real Time Clock Driver v1.12ac
[ 1.765801] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.765935] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.766624] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.766845] mice: PS/2 mouse device common for all mice
[ 1.767612] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.767773] input: Macintosh mouse button emulation as /class/input/input0
[ 1.767815] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.767820] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.768027] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.770277] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.770283] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.770398] EISA: Probing bus 0 at eisa.0
[ 1.770405] Cannot allocate resource for EISA slot 1
[ 1.770408] Cannot allocate resource for EISA slot 2
[ 1.770430] EISA: Detected 0 cards.
[ 1.800501] TCP cubic registered
[ 1.800509] NET: Registered protocol family 1
[ 1.800534] Starting balanced_irq
[ 1.800541] Using IPI No-Shortcut mode
[ 1.800624] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.800669] Magic number: 7:812:329
[ 1.800762] hash matches device tty50
[ 1.800947] Freeing unused kernel memory: 328k freed
[ 1.803103] Time: tsc clocksource has been installed.
[ 1.815536] input: AT Translated Set 2 keyboard as /class/input/input1
[ 3.013610] Capability LSM initialized
[ 3.053808] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [COMPAQ] OemTableId [ CPU_TM2] [20060707]
[ 3.053876] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 3.054063] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.500276] SCSI subsystem initialized
[ 3.524630] libata version 2.20 loaded.
[ 3.552757] ata_piix 0000:00:1f.1: version 2.10ac1
[ 3.552777] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 16
[ 3.552803] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 3.552876] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000120a0 irq 14
[ 3.552919] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000120a8 irq 15
[ 3.552944] scsi0 : ata_piix
[ 3.572614] usbcore: registered new interface driver usbfs
[ 3.572644] usbcore: registered new interface driver hub
[ 3.572676] usbcore: registered new device driver usb
[ 3.639469] USB Universal Host Controller Interface driver v3.0
[ 3.664989] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[ 3.681356] Floppy drive(s): fd0 is 1.44M
[ 3.696297] FDC 0 is a post-1991 82077
[ 3.870613] ata1.00: ATAPI, max UDMA/66
[ 4.034528] ata1.00: configured for UDMA/66
[ 4.034541] scsi1 : ata_piix
[ 4.200310] ATA: abnormal status 0x7F on port 0x00010177
[ 4.206447] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-111D 1.23 PQ: 0 ANSI: 5
[ 4.207242] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 4.362125] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
[ 4.362146] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.362183] ata3: SATA max UDMA/133 cmd 0x000120d8 ctl 0x000120f2 bmdma 0x000120b0 irq 17
[ 4.362223] ata4: SATA max UDMA/133 cmd 0x000120e0 ctl 0x000120f6 bmdma 0x000120b8 irq 17
[ 4.362236] scsi2 : ata_piix
[ 4.526248] ata3.00: ATA-7: ST3808110AS, 3.AHH, max UDMA/100
[ 4.526252] ata3.00: 156301488 sectors, multi 16: LBA48
[ 4.534256] ata3.00: configured for UDMA/100
[ 4.534265] scsi3 : ata_piix
[ 4.698209] ata4.00: ATA-7: SAMSUNG HD080HJ, WT100-33, max UDMA/100
[ 4.698213] ata4.00: 156301488 sectors, multi 16: LBA48
[ 4.706212] ata4.00: configured for UDMA/100
[ 4.706307] scsi 2:0:0:0: Direct-Access ATA ST3808110AS 3.AH PQ: 0 ANSI: 5
[ 4.706862] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD080HJ WT10 PQ: 0 ANSI: 5
[ 4.707345] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 4.707359] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 4.707364] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.707645] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 4.707676] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00002000
[ 4.710080] usb usb1: configuration #1 chosen from 1 choice
[ 4.710128] hub 1-0:1.0: USB hub found
[ 4.710139] hub 1-0:1.0: 2 ports detected
[ 4.814100] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 18 (level, low) -> IRQ 19
[ 4.814113] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 4.814118] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.814149] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 4.814179] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002020
[ 4.814312] usb usb2: configuration #1 chosen from 1 choice
[ 4.814355] hub 2-0:1.0: USB hub found
[ 4.814365] hub 2-0:1.0: 2 ports detected
[ 4.918062] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 20
[ 4.918075] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 4.918080] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.918111] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 4.918140] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00002040
[ 4.918264] usb usb3: configuration #1 chosen from 1 choice
[ 4.918308] hub 3-0:1.0: USB hub found
[ 4.918318] hub 3-0:1.0: 2 ports detected
[ 5.022037] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 21
[ 5.022049] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 5.022054] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.022085] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 5.022117] uhci_hcd 0000:00:1d.3: irq 21, io base 0x00002060
[ 5.022242] usb usb4: configuration #1 chosen from 1 choice
[ 5.022285] hub 4-0:1.0: USB hub found
[ 5.022296] hub 4-0:1.0: 2 ports detected
[ 5.126104] tg3.c:v3.72 (January 8, 2007)
[ 5.126129] ACPI: PCI Interrupt 0000:3f:00.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 5.126141] PCI: Setting latency timer of device 0000:3f:00.0 to 64
[ 5.146189] eth0: Tigon3 [partno(BCM95752) rev 6001 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:60:9d:9d:da
[ 5.146201] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[ 5.146206] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 5.146256] ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 5.150256] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 18
[ 5.150269] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 5.150274] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.150296] eth1: VIA Rhine II at 0x11000, 00:05:5d:e6:d4:8c, IRQ 19.
[ 5.150323] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 5.150386] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.150403] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 5.150417] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xe04c4000
[ 5.151037] eth1: MII PHY found at address 8, status 0x7809 advertising 01e1 Link 0000.
[ 5.154311] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.154438] usb usb5: configuration #1 chosen from 1 choice
[ 5.154485] hub 5-0:1.0: USB hub found
[ 5.154494] hub 5-0:1.0: 8 ports detected
[ 5.281242] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 5.281269] sda: Write Protect is off
[ 5.281274] sda: Mode Sense: 00 3a 00 00
[ 5.281304] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.281394] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 5.281416] sda: Write Protect is off
[ 5.281420] sda: Mode Sense: 00 3a 00 00
[ 5.281454] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.281460] sda:sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
[ 5.291235] Uniform CD-ROM driver Revision: 3.20
[ 5.291291] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 5.296503] sda1 sda2
[ 5.296841] sd 2:0:0:0: Attached scsi disk sda
[ 5.296922] SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
[ 5.296939] sdb: Write Protect is off
[ 5.296942] sdb: Mode Sense: 00 3a 00 00
[ 5.296970] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.297027] SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
[ 5.297043] sdb: Write Protect is off
[ 5.297047] sdb: Mode Sense: 00 3a 00 00
[ 5.297072] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.297076] sdb: sdb1 sdb2 <>
[ 5.330717] sd 3:0:0:0: Attached scsi disk sdb
[ 5.339432] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 5.339467] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.339496] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 5.556494] Attempting manual resume
[ 5.556498] swsusp: Resume From Partition 8:1
[ 5.556500] PM: Checking swsusp image.
[ 5.556784] PM: Resume from disk failed.
[ 5.568222] ReiserFS: sda2: found reiserfs format "3.6" with standard journal
[ 5.568230] ReiserFS: sda2: using ordered data mode
[ 5.570236] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 5.570601] ReiserFS: sda2: checking transaction log (sda2)
[ 5.598805] ReiserFS: sda2: Using r5 hash to sort names
[ 5.766167] usb 3-1: new full speed USB device using uhci_hcd and address 3
[ 5.939701] usb 3-1: configuration #1 chosen from 1 choice
[ 5.942646] hub 3-1:1.0: USB hub found
[ 5.945616] hub 3-1:1.0: 4 ports detected
[ 11.597159] eth0: link down
[ 11.923412] NET: Registered protocol family 10
[ 11.923545] lo: Disabled Privacy Extensions
[ 11.923611] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 11.923614] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.692563] NET: Registered protocol family 17
[ 12.803771] Linux agpgart interface v0.102 (c) Dave Jones
[ 12.806106] agpgart: Detected an Intel 945G Chipset.
[ 12.806806] agpgart: Detected 7932K stolen memory.
[ 12.823941] agpgart: AGP aperture is 256M @ 0xd0000000
[ 12.900922] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.903192] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.313225] parport: PnPBIOS parport detected.
[ 13.313287] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 13.352250] input: PC Speaker as /class/input/input2
[ 13.370957] intel_rng: Firmware space is locked read-only. If you can't or
[ 13.370961] intel_rng: don't want to disable this in firmware setup, and if
[ 13.370964] intel_rng: you are certain that your system has a functional
[ 13.370966] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 13.410532] iTCO_vendor_support: vendor-support=0
[ 13.411838] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 13.493959] tg3: eth1: Link is up at 100 Mbps, full duplex.
[ 13.493964] tg3: eth1: Flow control is on for TX and on for RX.
[ 13.496823] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 13.840217] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
[ 13.840239] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 14.143617] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[ 14.147252] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x7860)
[ 14.147268] iTCO_wdt: heartbeat value must be 2
[ 34.618531] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 35.294220] ppdev: user-space parallel port driver
[ 35.750436] apm: BIOS not found.
[ 35.967325] Bluetooth: Core ver 2.11
[ 35.967398] NET: Registered protocol family 31
[ 35.967402] Bluetooth: HCI device and connection manager initialized
[ 35.967407] Bluetooth: HCI socket layer initialized
[ 36.003220] Bluetooth: L2CAP ver 2.8
[ 36.003227] Bluetooth: L2CAP socket layer initialized
[ 36.218399] Bluetooth: RFCOMM socket layer initialized
[ 36.218413] Bluetooth: RFCOMM TTY layer initialized
[ 36.218417] Bluetooth: RFCOMM ver 1.8
[ 4700.667550] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 4703.035413] ISOFS: changing to secondary root
沒有留言:
張貼留言